This high-strength carbon steel stock sheet, measuring 0.491" thick by 44" x 47", is specifically designed for critical hydraulic component fabrication. Its robust material properties ensure exceptional durability and structural integrity in high-pressure environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.491" |
| Length | 44" |
| Width | 47" |
Engineered for reliability and performance, this carbon steel stock sheet offers a substantial 0.491" thickness, providing superior structural integrity for demanding hydraulic applications. Its 44" length and 47" width allow for efficient fabrication of larger hydraulic components, manifolds, and structural supports. The material's inherent strength and resilience are vital for withstanding the extreme pressures and operational stresses characteristic of hydraulic systems, ensuring long-term service life and preventing premature failure. This sheet is optimized for machining and welding, facilitating precise component creation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material suitability for the specific hydraulic system design requirements. 2. Precisely cut the sheet to the required dimensions using appropriate cutting tools. 3. Fabricate and integrate the component into the hydraulic assembly, adhering to all relevant design and safety standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or lower-grade steel for high-pressure hydraulic components. | Always select carbon steel stock sheets that meet or exceed the specified thickness and strength requirements for the intended hydraulic application. |
| Inadequate surface preparation before welding or assembly, leading to compromised joint integrity. | Thoroughly clean and prepare all surfaces to be joined, removing any mill scale, rust, oil, or other contaminants to ensure strong, leak-free welds. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic manifold blocks, Hydraulic cylinder end caps, Heavy-duty hydraulic system structural supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||