This robust carbon steel stock sheet, precisely manufactured to 0.491" thickness, 48" length, and 32" width, offers superior strength and formability for demanding heating, cooling, and general industrial fabrication.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.491" |
| Length | 48" |
| Width | 32" |
Manufactured under strict quality controls, this carbon steel stock sheet exhibits a nominal thickness of 0.491 inches (12.47 mm), a standard length of 48 inches (1219 mm), and a width of 32 inches (813 mm). Composed primarily of iron and carbon, it offers excellent tensile strength and ductility, making it ideal for applications requiring structural integrity and ease of fabrication through cutting, bending, and welding. Its inherent hardness and resistance to deformation are crucial for components subjected to thermal cycling and mechanical stress. Suitable for a wide range of industrial and construction purposes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the stock sheet is clean and free from contaminants before fabrication. 2. Utilize appropriate cutting and forming equipment calibrated for the material thickness. 3. Follow established welding procedures for carbon steel to ensure joint integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to edge deformation. | Employ high-quality, sharp cutting blades designed for heavy gauge steel to maintain precise edges. |
| Inadequate surface preparation for welding. | Thoroughly clean weld areas to remove any mill scale, rust, or grease to ensure optimal weld penetration and strength. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: HVAC ductwork and plenums, Industrial machinery frames and components, General fabrication and metalwork projects.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||