This premium brass stock sheet, precisely manufactured to 0.489 inches thick, offers superior performance in demanding pressure and temperature control systems. Its robust composition ensures longevity and reliability.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.489" |
| Length | 28" |
| Width | 21" |
Specified by design engineers worldwide, this 0.489" thick brass stock sheet (28" x 21") is engineered for critical pressure and temperature control applications. Composed of high-grade brass alloy, it exhibits excellent thermal conductivity, corrosion resistance, and inherent strength suitable for high-pressure environments. Its precise dimensions and material integrity ensure consistent performance in valves, regulators, heat exchangers, and instrumentation where reliable fluid and thermal management is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass sheet is clean and free of any contaminants. 2. Accurately cut the sheet to the required dimensions using appropriate metalworking tools. 3. Securely fasten the fabricated component within the pressure or temperature control assembly, adhering to all relevant engineering drawings and safety standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong grade of brass for high-pressure applications. | Always verify that the brass alloy meets the specific pressure and temperature ratings required by the application. |
| Improper handling leading to surface damage or deformation. | Handle the brass sheet with care, using appropriate lifting and cutting equipment to maintain dimensional accuracy and surface integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure Vessel Components, Temperature Regulators, Heat Exchanger Plates, Instrumentation Housings, Valve Bodies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||