This industrial-grade brass stock sheet offers exceptional durability and machinability. Its precise dimensions and inherent brass properties make it suitable for a wide range of demanding fabrication and manufacturing applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.486" |
| Length | 17" |
| Width | 32" |
Engineered for reliability and performance, this brass stock sheet is manufactured to exacting standards with a thickness of 0.486 inches, a length of 17 inches, and a width of 32 inches. Composed of a premium brass alloy, it exhibits excellent corrosion resistance, superior electrical and thermal conductivity, and good workability for stamping, bending, and machining. Its substantial gauge ensures structural integrity for applications requiring robust material properties.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface thoroughly to remove any contaminants. 2. Precisely cut the brass sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using suitable fasteners or adhesives, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners for structural applications. | Always utilize fasteners with a diameter and material strength appropriate for the load-bearing requirements of the brass sheet. |
| Applying excessive heat during welding or brazing. | Employ controlled heating and cooling cycles to prevent material distortion and loss of mechanical properties. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical component fabrication, Custom metal artwork and sculpture, Industrial paneling and enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||