This 0.484-inch thick, 43" x 27" sheet of 6061 aluminum provides exceptional strength-to-weight ratio and corrosion resistance. It's a versatile material for demanding structural applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.484" |
| Length | 43" |
| Width | 27" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet offers a nominal thickness of 0.484 inches, a length of 43 inches, and a width of 27 inches. Alloy 6061 is a precipitation-hardened aluminum alloy, known for its good strength, excellent corrosion resistance, and good weldability. It's a versatile choice for structural components, marine applications, and general fabrication where a balance of strength and workability is required.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surface is clean and free of contaminants. 2. Cut to desired dimensions using appropriate tooling (e.g., shear, laser, waterjet). 3. Prepare edges for joining or further processing as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for aluminum thickness. | Employ high-speed steel or carbide-tipped cutting tools designed for aluminum to prevent galling and ensure clean cuts. |
| Neglecting proper support during cutting or handling. | Always support the sheet adequately to prevent bending or deformation, especially when cutting larger pieces. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Aerospace structural components, Automotive frames and body panels, Marine construction and fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||