High-strength carbon steel stock sheet engineered for robust hydraulic systems. This 0.482" thick sheet offers superior durability and performance in high-pressure environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.482" |
| Length | 42" |
| Width | 27" |
Manufactured under strict quality controls, this 0.482-inch thick carbon steel stock sheet provides exceptional structural integrity and wear resistance, essential for demanding hydraulic applications. Its 42-inch length and 27-inch width offer versatile fabrication capabilities for custom components. The material's inherent strength and machinability ensure reliable performance and ease of integration into complex hydraulic circuits, withstands significant operational stresses and impacts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and specifications against project requirements. 2. Prepare the sheet for cutting, bending, or welding according to design blueprints. 3. Integrate fabricated components into the hydraulic system, ensuring proper sealing and connection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect sheet thickness for load-bearing hydraulic components. | Always consult hydraulic system design specifications to ensure the selected sheet thickness can safely withstand anticipated pressures and stresses. |
| Inadequate surface preparation before welding, leading to weak joints. | Thoroughly clean the carbon steel surface of all oils, rust, and contaminants before welding to ensure optimal weld penetration and strength. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic manifold blocks, Cylinder end caps and bases, Structural support for hydraulic machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||