This substantial brass stock sheet is engineered for robust performance. Its considerable thickness and durable brass composition make it ideal for demanding industrial hardware and fabrication projects requiring strength and longevity.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.482" |
| Length | 39" |
| Width | 32" |
Purpose-built for heavy-duty applications, this brass stock sheet boasts a precise thickness of 0.482 inches, a generous length of 39 inches, and a width of 32 inches. Manufactured from high-quality brass, it exhibits excellent corrosion resistance, superior machinability, and good electrical conductivity, making it suitable for a wide array of industrial components, structural elements, and custom fabrication tasks where reliability and longevity are paramount. The material's inherent properties ensure dependable performance under significant mechanical stress and environmental exposure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation surface is clean, level, and structurally sound. 2. Carefully position the brass stock sheet, aligning it with project specifications. 3. Secure the sheet using appropriate fasteners and techniques based on the application's load-bearing requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for the load. | Utilize high-strength, corrosion-resistant fasteners specifically chosen for the intended application and expected loads. |
| Inadequate edge preparation leading to stress concentration. | Properly deburr and chamfer all cut edges to prevent premature failure and ensure smooth handling. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty structural components, Industrial machinery parts, Custom fabrication and prototyping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||