Engineered for robust performance in demanding heating and cooling systems, this 0.480" thick carbon steel stock sheet offers exceptional durability and structural integrity for fabrication.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.480" |
| Length | 22" |
| Width | 45" |
Specified by design engineers worldwide, this 0.480" thick carbon steel stock sheet measures 22" in width and 45" in length. Exhibiting a minimum tensile strength of 40,000 psi and yield strength of 25,000 psi, it is ideal for applications requiring high structural load-bearing capacity and resistance to thermal stress. Its excellent weldability ensures seamless integration into complex ductwork, heat exchangers, and furnace components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish against project specifications. 2. Prepare edges for welding or fastening according to fabrication drawings. 3. Integrate sheet into the designated heating or cooling system component, ensuring proper sealing and structural support.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate edge preparation leading to weld porosity or failure. | Thoroughly clean and bevel edges to the required angle and depth prior to welding for optimal joint integrity. |
| Improper material handling causing dents or scratches that compromise structural integrity. | Utilize appropriate lifting equipment and protective measures during transport and placement to maintain surface and dimensional accuracy. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Industrial Ductwork Fabrication, Heat Exchanger Housings, Furnace and Boiler Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||