This robust brass stock sheet, at 0.474" thickness, is engineered for superior performance in pulling and lifting applications. Its high-quality brass construction ensures longevity and reliability in challenging industrial settings.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.474" |
| Length | 16" |
| Width | 31" |
Designed for demanding industrial environments, this brass stock sheet measures 0.474 inches in thickness, 16 inches in width, and 31 inches in length. Constructed from premium brass alloys, it exhibits excellent corrosion resistance, high tensile strength, and non-sparking properties, making it ideal for environments where ignition hazards are a concern. The material's inherent durability and machinability allow for custom fabrication and integration into a wide array of pulling and lifting apparatus, ensuring reliable operation under significant load conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately mark and drill mounting holes according to fabrication specifications. 3. Securely fasten the brass stock sheet using appropriate industrial-grade fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners which can cause galvanic corrosion with brass. | Always utilize brass, bronze, or stainless steel fasteners to prevent galvanic corrosion. |
| Over-tightening fasteners, leading to deformation or stress fractures in the brass sheet. | Apply torque evenly and to the manufacturer's recommended specifications for the fasteners used. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Reinforcement plates for lifting slings and eye bolts, Wear plates in heavy-duty pulley systems, Custom fabricated components for winches and hoists.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||