This 0.469" thick Nylon stock sheet, measuring 41" x 32", is engineered for robust performance in pressure and temperature control systems. Its superior material properties ensure reliability in demanding industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.469" |
| Length | 41" |
| Width | 32" |
Manufactured under strict quality controls, this 0.469" thick Nylon stock sheet boasts precise dimensions of 41" in length and 32" in width. Nylon's inherent properties, including excellent wear resistance, chemical inertness, and thermal stability, make it ideal for applications requiring consistent performance under varying pressure and temperature conditions. This material provides a durable and reliable barrier or component in fluid handling, sealing, and insulation systems within industrial processing and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and shaping operations are performed to the exact dimensional requirements. 2. Clean all mating surfaces thoroughly to remove any debris or contaminants. 3. Install the fabricated Nylon component using appropriate fastening methods, ensuring a secure and leak-free fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to poor edge quality. | Employ sharp, specialized tooling designed for cutting Nylon to achieve clean, precise edges. |
| Over-tightening fasteners, which can cause stress cracking or deformation of the Nylon. | Utilize appropriate torque specifications and consider using washers to distribute load when securing Nylon components. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Diaphragm materials for pressure regulators, Gaskets and seals in high-temperature pipelines, Insulating barriers in thermal management systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||