This 0.465-inch thick carbon steel stock sheet, measuring 28 inches by 19 inches, is engineered for robust performance in hydraulic systems. Its precise dimensions and material composition ensure reliability under pressure.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.465" |
| Length | 28" |
| Width | 19" |
Manufactured under strict quality controls, this carbon steel stock sheet exhibits superior tensile strength and yield strength, crucial for high-pressure hydraulic environments. The 0.465" thickness provides significant structural integrity against deformation and fatigue, ensuring longevity in demanding applications. Its dimensions of 28" x 19" offer ample material for fabrication of critical hydraulic components such as manifold blocks, accumulator housings, and pump casings. The material's inherent toughness makes it resistant to abrasion and impact, further enhancing its suitability for rugged industrial use. Rigorous testing verifies dimensional accuracy and material uniformity, guaranteeing consistent performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the carbon steel sheet to the required component dimensions using appropriate cutting tools. 2. Machine edges and surfaces to specifications, ensuring proper mating surfaces for assembly. 3. Apply appropriate surface treatments or coatings as per hydraulic system design requirements before final assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel instead of hydraulic-grade carbon steel for critical components. | Always specify and use carbon steel specifically rated for hydraulic applications to ensure adequate pressure resistance and durability. |
| Inadequate edge preparation leading to stress concentrations. | Thoroughly deburr and finish all cut edges to remove stress risers and prevent premature failure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Accumulator Housings, Pump and Valve Bodies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||