This 0.464-inch thick carbon steel stock sheet, measuring 20x30 inches, is engineered for robust hydraulic systems. Its superior strength and durability make it ideal for critical components requiring high load-bearing capacity.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.464" |
| Length | 20" |
| Width | 30" |
Specified by design engineers worldwide, this 0.464-inch thick carbon steel stock sheet is manufactured to exacting standards for optimal performance in hydraulic applications. Its substantial thickness ensures exceptional structural integrity and resistance to high pressures and operational stresses. The material's inherent strength and ductility, characteristic of high-quality carbon steel, allow for precise fabrication and reliable integration into complex hydraulic manifold systems, pump housings, and cylinder bodies, guaranteeing longevity and operational efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface, ensuring it is clean and free of debris. 2. Accurately position the carbon steel sheet according to design specifications. 3. Securely fasten the sheet using appropriate welding or bolting techniques, adhering to tensile strength requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation leading to poor weld adhesion or fastener seating. | Thoroughly clean and degrease the mounting surface before any fastening or welding operations. |
| Over-tightening fasteners, which can cause stress concentrations and deformation. | Utilize torque wrenches to ensure fasteners are tightened to the manufacturer's recommended specifications for the specific application. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Cylinder End Caps, Pump Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||