This robust Nylon stock sheet is engineered for critical hydraulic systems. Its superior toughness and self-lubricating properties ensure reliable performance in demanding environments, offering excellent wear resistance and impact strength.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.459" |
| Length | 36" |
| Width | 30" |
Built to exacting engineering tolerances, this 0.459" thick Nylon stock sheet measures 30" in width and 36" in length. Manufactured from high-performance Nylon, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction, making it ideal for components subjected to continuous movement and high pressure in hydraulic applications. Its inherent chemical resistance further extends its service life in challenging fluid environments. This material is well-suited for fabrication into seals, wear pads, and structural components within hydraulic manifolds and cylinders.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate machining tools. 2. Ensure all mating surfaces are clean and free of debris before assembly. 3. Securely fasten fabricated components according to system design specifications, verifying proper alignment and seal integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Machining Nylon with dull or incorrect tooling, leading to material tearing or excessive heat buildup. | Utilize sharp, high-speed steel or carbide tooling designed for plastic machining. Maintain appropriate feed rates and cooling to prevent overheating. |
| Over-tightening fasteners, which can cause Nylon to deform or crack under stress. | Apply torque specifications appropriate for Nylon, using washers to distribute load. Allow for thermal expansion and contraction in the design. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seals and Gaskets, Wear Strips and Bushings, Hydraulic Cylinder Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||