High-performance 0.455-inch thick nylon stock sheet, measuring 42 inches by 13 inches. Engineered for exceptional pressure and temperature control in critical industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.455" |
| Length | 42" |
| Width | 13" |
Specified by design engineers worldwide, this 0.455" thick nylon stock sheet offers a robust solution for demanding pressure and temperature control applications. Its 42" length and 13" width provide ample material for custom fabrication. Nylon's inherent properties, including excellent abrasion resistance, chemical stability, and a high tensile strength, make it ideal for seals, gaskets, wear pads, and structural components within systems operating under moderate to high pressure and varying thermal conditions. Its dielectric strength also contributes to its versatility in electromechanical assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the nylon stock sheet to the required dimensions using appropriate cutting tools for plastics. 2. Prepare mating surfaces for sealing or joining applications, ensuring they are clean and free of debris. 3. Install the fabricated nylon component, applying appropriate fasteners or adhesives as per the system design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to jagged edges or material stress. | Utilize sharp, dedicated plastic cutting tools such as band saws, jig saws with fine-tooth blades, or CNC routers for clean, precise cuts. |
| Over-tightening fasteners, which can cause cracking or deformation of the nylon. | Employ torque-limiting tools or follow specified torque values to prevent over-compression and potential damage to the nylon component. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: High-pressure sealing components, Temperature-resistant gaskets, Wear-resistant bushings and bearings, Electrical insulation components, Custom fabricated structural parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||