This 0.451-inch thick 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength, ideal for high-pressure and high-temperature environments. Its precise dimensions ensure reliable performance.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.451" |
| Length | 40" |
| Width | 19" |
Precision-manufactured to tight tolerances, this 0.451" thick, 40" long, and 19" wide 304 stainless steel stock sheet is engineered for critical applications. The 304 grade provides excellent corrosion resistance, particularly against oxidizing acids, and maintains its structural integrity at elevated temperatures. Its substantial thickness makes it suitable for components requiring high tensile strength and resistance to deformation under pressure, common in pressure vessels, heat exchangers, and specialized industrial piping systems where material reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensional accuracy against project specifications. 2. Prepare mating surfaces to ensure a clean and even fit. 3. Secure sheet using appropriate fastening methods for the application (e.g., welding, bolting) following industry standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower grade of stainless steel for corrosive environments. | Always select 304 stainless steel or higher for environments with significant corrosive potential. |
| Inadequate surface preparation before joining. | Thoroughly clean and degrease all surfaces to be joined to ensure proper weld penetration or seal integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, High-temperature ducting, Corrosive fluid handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||