This 0.448" thick Nylon stock sheet is engineered for superior performance in hydraulic systems. Its robust material properties offer excellent wear resistance and impact absorption, ensuring long-term reliability.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.448" |
| Length | 15" |
| Width | 19" |
Engineered for reliability and performance, this 0.448" thick Nylon stock sheet boasts a 15" width and 19" length, ideal for custom fabrication in hydraulic applications. Nylon's inherent properties, including high tensile strength, excellent abrasion resistance, and good impact strength, make it a superior choice for seals, wear pads, and protective components. It exhibits low friction and good chemical resistance to many hydraulic fluids, contributing to extended component life and reduced maintenance requirements in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 2. Machine or form the cut pieces to precise specifications for seamless integration into hydraulic assemblies. 3. Install the fabricated Nylon components, ensuring proper fit and clearance within the hydraulic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to delamination or rough edges. | Utilize sharp, high-speed cutting tools specifically designed for plastics or composites to ensure clean, precise cuts. |
| Overheating the material during machining, causing melting or degradation. | Employ adequate cooling lubricants and moderate cutting speeds to prevent thermal damage to the Nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic seals and O-rings, Wear pads and guide elements, Protective covers and guards, Bushings and bearings in fluid power systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||