This high-performance Nylon stock sheet is engineered for demanding hydraulic systems. Its robust material properties ensure excellent wear resistance, low friction, and chemical inertness, making it ideal for critical components.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.446" |
| Length | 38" |
| Width | 24" |
Precision-manufactured to tight tolerances, this 0.446-inch thick Nylon stock sheet measures 38 inches in length and 24 inches in width. Exhibiting excellent tensile strength and impact resistance, this grade of Nylon offers superior wear characteristics and a low coefficient of friction, crucial for reducing wear in dynamic hydraulic components. Its inherent chemical resistance to oils, greases, and many solvents ensures longevity in harsh operational environments. This material is well-suited for fabricating seals, bearings, wear pads, and custom-machined parts within hydraulic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free from debris. 2. Accurately machine the Nylon stock to the required dimensions for the specific hydraulic component. 3. Install the fabricated Nylon part into the hydraulic system, ensuring proper fitment and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect machining parameters, leading to material degradation or poor surface finish. | Refer to Nylon machining guidelines and utilize sharp tooling with appropriate speeds and feeds to maintain material integrity and achieve a precise finish. |
| Over-tightening fasteners or applying excessive stress during installation, causing premature failure. | Utilize proper torque specifications and avoid excessive clamping forces. Consider the inherent flexibility of Nylon and allow for thermal expansion. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seal Manufacturing, Wear Pad Fabrication, Custom Hydraulic Component Machining.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||