This robust 0.444" thick carbon steel stock sheet is engineered for demanding hydraulic applications. Its substantial dimensions (35" x 17") and high-strength material ensure superior performance and longevity in critical systems.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.444" |
| Length | 35" |
| Width | 17" |
A proven choice for industrial professionals, this 0.444" thick carbon steel stock sheet offers exceptional tensile strength and rigidity, crucial for withstanding high pressures in hydraulic systems. Measuring 35" in length and 17" in width, it is manufactured from high-grade carbon steel, ensuring excellent weldability and machinability for custom fabrication. Its precise thickness and material composition make it ideal for constructing robust hydraulic manifolds, reservoirs, and structural components requiring superior load-bearing capabilities. Adherence to stringent material standards guarantees consistent performance and reliability in the most challenging operational environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting area is clean and free of contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate industrial cutting equipment. 3. Smooth all cut edges to remove burrs and sharp points before further processing or installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper handling leading to pre-installation damage. | Store and handle sheets flat, avoiding dropping or bending, to maintain dimensional integrity. |
| Inadequate edge finishing after cutting. | Thoroughly deburr and chamfer all cut edges to prevent stress risers and facilitate proper sealing. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Fabrication, High-Pressure Reservoir Construction, Heavy-Duty Structural Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||