This robust carbon steel stock sheet, precision-engineered for heavy-duty pulling and lifting operations, offers exceptional strength and resilience. Its substantial 0.438-inch thickness ensures superior load-bearing capacity for critical industrial tasks.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.438" |
| Length | 47" |
| Width | 20" |
Specified by design engineers worldwide, this carbon steel stock sheet exhibits a tensile strength of approximately 60,000 psi and a yield strength of 30,000 psi, making it ideal for high-stress environments. Measuring 0.438 inches in thickness, 47 inches in length, and 20 inches in width, its durable carbon steel composition provides excellent resistance to wear and deformation. This material is a cornerstone for fabricating robust lifting eyes, towing components, and structural reinforcements in demanding industrial machinery and automotive applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, free of debris, and properly prepared for structural integrity. 2. Align the stock sheet with pre-drilled holes or designated mounting points, utilizing appropriate fasteners rated for the intended load. 3. Securely fasten the sheet, ensuring even distribution of load and torque as per application-specific engineering drawings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners. | Always use fasteners with a tensile strength and grade that meet or exceed the load requirements of the application and the stock sheet's capabilities. |
| Inadequate surface preparation before attachment. | Thoroughly clean and degrease the mounting surface to ensure optimal contact and prevent corrosion, which can compromise structural integrity over time. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Fabrication of heavy-duty lifting lugs and eyes, Construction of robust towing and recovery equipment, Reinforcement plates for structural components in industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||