This robust 0.432-inch thick carbon steel stock sheet is engineered for demanding hydraulic applications. Its precise dimensions and superior material properties ensure reliable performance and longevity in high-pressure environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.432" |
| Length | 19" |
| Width | 27" |
Built to exacting engineering tolerances, this 0.432" thick carbon steel stock sheet measures 19" in length and 27" in width, providing a substantial surface area for fabrication. Composed of high-grade carbon steel, it offers exceptional tensile strength and yield strength, crucial for withstanding extreme pressures and stresses inherent in hydraulic systems. This material's inherent toughness and resistance to deformation make it ideal for constructing hydraulic reservoirs, manifolds, structural components, and custom pressure vessels where structural integrity is paramount. Its machinability allows for precise integration with other hydraulic components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the stock sheet to the required dimensions using appropriate metalworking equipment. 2. Prepare edges for welding or joining, ensuring a clean and smooth surface. 3. Fabricate and integrate into the hydraulic system according to design specifications, verifying all connections for leak-free operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-quality steel for hydraulic components. | Always specify and utilize carbon steel stock sheet that meets or exceeds the required material grade and thickness for the intended hydraulic pressure and load. |
| Inadequate edge preparation before welding or assembly. | Ensure all edges are properly chamfered, deburred, and cleaned to facilitate strong, defect-free welds and secure joints, preventing premature failure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic System Fabrication, Custom Manifold Construction, Pressure Vessel Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||