This robust carbon steel stock sheet is engineered for the rigors of industrial heating and cooling systems. Its substantial thickness ensures exceptional durability and heat resistance for critical components.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.432" |
| Length | 22" |
| Width | 45" |
Purpose-built for heavy-duty applications, this carbon steel stock sheet boasts a significant thickness of 0.432 inches, providing superior structural integrity and thermal mass. Measuring 22 inches in width and 45 inches in length, it is ideally suited for fabricating robust heat exchangers, furnace components, ductwork, and structural supports within demanding industrial environments. The inherent strength and high melting point of carbon steel make it an economical and reliable choice for applications involving extreme temperatures and significant mechanical stress. Its formability allows for precise shaping to meet complex design requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Precisely cut the carbon steel sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet to the designated structural components using approved welding or bolting techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs and inaccurate dimensions. | Employ specialized metal cutting saws or plasma cutters for clean, precise cuts. Always deburr edges after cutting. |
| Inadequate surface preparation before welding, resulting in weak joints. | Thoroughly clean the welding surfaces with a wire brush or grinder to remove rust, mill scale, and contaminants. Use a suitable flux or shielding gas. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Industrial Heat Exchanger Fabrication, Furnace and Boiler Construction, High-Temperature Ducting Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||