This robust 0.430-inch thick nylon stock sheet provides superior mechanical strength, abrasion resistance, and low friction. Its dimensional stability makes it ideal for custom fabrication of wear components and structural parts.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.430" |
| Length | 14" |
| Width | 22" |
Built to exacting engineering tolerances, this 0.430-inch thick nylon stock sheet measures 14 inches by 22 inches. Composed of high-grade nylon, it exhibits excellent tensile strength, impact resistance, and a low coefficient of friction, minimizing wear and tear in dynamic applications. Its inherent lubricity and machinability allow for precise fabrication of gears, bearings, bushings, and wear pads. This material is well-suited for environments requiring resistance to chemicals and moisture, ensuring longevity in operational integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired dimensions on the nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., saw, router) with proper safety precautions. 3. Machine or finish edges as required for intended application, ensuring tight tolerances.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper cooling, leading to melting and poor cut quality. | Employ high-speed steel or carbide cutting tools with adequate lubrication or coolant to prevent heat buildup and ensure clean cuts. |
| Over-tightening fasteners, causing stress concentrations and potential cracking in the nylon. | Utilize washers and avoid excessive torque when fastening. Consider slotted holes for expansion and contraction. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Custom bushings and bearings, Gears and sprockets, Impact plates, Machine components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||