This high-quality Nylon stock sheet, measuring 0.423 inches thick, 36 inches in length, and 25 inches in width, offers exceptional durability and wear resistance for demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.423" |
| Length | 36" |
| Width | 25" |
Trusted by engineers across multiple sectors, this Nylon stock sheet provides robust performance due to its inherent material properties, including excellent tensile strength, abrasion resistance, and good electrical insulation. The precise dimensions of 0.423" x 36" x 25" allow for accurate custom fabrication of components such as wear pads, bushings, gears, and structural elements. Its machinability makes it suitable for prototyping and high-volume production alike, ensuring reliable application in mechanical and electrical systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark precise cutting lines on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw, router) to achieve desired dimensions. 3. Smooth cut edges using sanding or deburring techniques for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools which can lead to melting or chipping of the Nylon. | Employ sharp, high-speed cutting tools specifically designed for plastics, ensuring adequate cooling if necessary. |
| Over-tightening fasteners when mounting, which can cause stress fractures in the Nylon. | Use washers and allow for slight expansion/contraction by not over-torquing fasteners; consider slotted holes for larger components. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Machined Parts, Wear Strips and Bushings, Gears and Sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||