This robust Nylon stock sheet is engineered for extreme durability and performance. Its substantial thickness and high-strength polymer composition make it ideal for critical components in demanding industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.422" |
| Length | 30" |
| Width | 26" |
Purpose-built for heavy-duty applications, this Nylon stock sheet offers exceptional wear resistance, high tensile strength, and excellent chemical inertness. Measuring 0.422 inches thick, 30 inches in length, and 26 inches in width, it's manufactured from a premium grade of Nylon (Polyamide) renowned for its load-bearing capabilities and low coefficient of friction. This material's inherent toughness and ability to withstand significant impact make it a preferred choice for custom machined parts, wear pads, bushings, and structural components requiring superior performance under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely measure and mark cutting lines on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw with a fine-tooth blade) for clean and accurate cuts. 3. Ensure edges are deburred and smoothed for optimal fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or chipping. | Employ specialized cutting blades for plastics with appropriate feed rates and cooling if necessary. |
| Over-tightening fasteners, which can cause stress concentration and cracking in the Nylon. | Use appropriate torque specifications and consider washers to distribute load when fastening. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Machined Wear Components, Heavy-Duty Bushings and Bearings, Impact-Resistant Structural Parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||