This robust 0.420-inch thick Nylon stock sheet is engineered for demanding hydraulic systems. Its superior material properties ensure longevity and efficient operation in high-pressure environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.420" |
| Length | 38" |
| Width | 36" |
A high-performance industrial component, this 0.420-inch thick Nylon stock sheet provides exceptional durability and wear resistance critical for hydraulic applications. Measuring 38 inches in length by 36 inches in width, its inherent toughness, low coefficient of friction, and excellent chemical resistance make it ideal for manufacturing seals, bearings, wear pads, and custom hydraulic components. Nylon's ability to absorb shock and vibration further enhances system reliability and reduces noise, ensuring optimal operational performance in challenging industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface for installation is clean and free of debris. 2. Cut the Nylon stock sheet to the required dimensions using appropriate tooling. 3. Secure the fabricated component using industry-standard fastening methods, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to delamination or imprecise edges. | Utilize sharp, specialized cutting tools designed for plastics, such as carbide-tipped saws or routers, to achieve clean, accurate cuts. |
| Over-tightening fasteners, causing stress concentrations and potential material cracking. | Apply fasteners with appropriate torque, utilizing washers to distribute load evenly and prevent localized pressure points on the Nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder components, Seals and wipers, Wear pads and guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||