This premium Nylon stock sheet, engineered to exacting standards, offers exceptional durability and wear resistance critical for high-pressure hydraulic systems. Its robust material properties ensure reliable performance under extreme conditions.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.415" |
| Length | 13" |
| Width | 13" |
Specified by design engineers worldwide, this 0.415-inch thick Nylon stock sheet measures 13 inches in length and 13 inches in width, conforming to stringent hydraulic industry requirements. Composed of high-grade Nylon, it exhibits excellent tensile strength, impact resistance, and low coefficient of friction, making it ideal for fabricating seals, valve components, and wear pads within hydraulic systems. Its inherent chemical resistance further enhances longevity in diverse operational environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free from contaminants. 2. Precisely machine components according to design specifications using appropriate tooling for Nylon. 3. deburr all edges thoroughly to prevent particulate generation within the hydraulic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Machining at excessive speeds leading to heat buildup and material deformation. | Utilize appropriate cutting speeds and lubrication to manage heat during machining. |
| Improper deburring, leaving sharp edges that can cause seal damage or system contamination. | Employ a controlled deburring process to ensure all edges are smooth and free of burrs. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder components, Valve seats and seals, Wear strips and bushings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||