This high-strength carbon steel stock sheet is engineered for demanding pulling and lifting operations. Its substantial thickness and dimensions provide exceptional structural integrity for critical industrial applications.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.413" |
| Length | 33" |
| Width | 27" |
Specified by design engineers worldwide, this carbon steel stock sheet offers superior tensile strength and yield point, essential for high-stress pulling and lifting equipment. With a precise thickness of 0.413 inches, a length of 33 inches, and a width of 27 inches, it is manufactured from high-grade carbon steel, ensuring excellent weldability and resistance to deformation under extreme loads. This material is ideal for fabricating robust custom components for cranes, hoists, winches, and other heavy-duty lifting apparatus.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris. 2. Position the sheet precisely according to design specifications. 3. Secure the sheet using appropriate welding or bolting techniques as dictated by the application's load requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation before welding. | Thoroughly clean the welding area to remove rust, paint, oil, and other contaminants to ensure optimal weld penetration and strength. |
| Overlooking the sheet's weight in handling and rigging plans. | Always account for the considerable weight of this carbon steel sheet in all lifting and maneuvering operations to prevent accidents and equipment damage. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Fabrication of custom crane and hoist components, Reinforcement plates for heavy-duty winches, Base plates and structural supports in material handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||