This heavy-duty carbon steel stock sheet is engineered for extreme duty in pulling and lifting applications. Its substantial thickness and dimensions ensure superior structural integrity and load-bearing capacity for demanding industrial environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.408" |
| Length | 41" |
| Width | 35" |
A high-performance industrial component, this carbon steel stock sheet boasts a robust 0.408" thickness, providing exceptional strength and rigidity. Measuring 41" in length and 35" in width, it offers a substantial surface area for fabrication into critical pulling and lifting apparatus. Manufactured from high-quality carbon steel, it exhibits excellent tensile strength, impact resistance, and weldability, making it suitable for custom rigging, winch bases, and heavy-duty structural supports. Its material properties ensure reliable performance under significant stress and dynamic loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare mounting surface, ensuring it is clean, level, and capable of supporting the intended load. 2. Precisely mark and drill mounting holes according to fabrication drawings or application requirements. 3. Securely fasten the carbon steel sheet using appropriately rated bolts, nuts, and washers, ensuring even torque distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate load-bearing assessment of the mounting surface. | Thoroughly calculate and verify the load capacity of the surface where the sheet will be installed before proceeding. |
| Using undersized or incompatible fasteners. | Always select fasteners (bolts, nuts, washers) that are rated for the maximum expected load and compatible with the carbon steel sheet's material and application. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom winch mounting plates, Heavy-duty rigging components, Structural supports for lifting equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||