This premium Nylon stock sheet, measuring 0.403" thick by 30"x17", is engineered for demanding hydraulic applications. Its robust material properties ensure superior performance and longevity in critical system components.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.403" |
| Length | 30" |
| Width | 17" |
Engineered for reliability and performance, this 0.403" thick Nylon stock sheet provides exceptional mechanical strength, low friction, and excellent wear resistance, crucial for high-pressure hydraulic environments. Its intrinsic toughness and resistance to moisture absorption make it ideal for fabricating seals, bushings, bearings, wear pads, and other components subjected to dynamic loads and abrasive conditions. The material's machinability allows for precise custom part creation, ensuring a perfect fit and optimal function within hydraulic circuits. Dimensions: 0.403" (Thickness) x 30" (Length) x 17" (Width).
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions for the intended component using appropriate machining tools. 2. Smooth all edges and remove any burrs to prevent damage to mating surfaces or seals. 3. Install the fabricated Nylon component into the hydraulic system, ensuring proper alignment and secure fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not suitable for plastics, leading to melting or rough edges. | Employ high-speed steel or carbide-tipped cutting tools designed for plastic machining, utilizing appropriate feed rates and cooling to prevent material degradation. |
| Over-tightening fasteners when installing Nylon components, which can cause cracking or deformation. | Use torque-limiting wrenches and allow for thermal expansion by not over-compressing the Nylon material. Consult material data sheets for recommended torque values. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Cylinder Seals, Pump Vanes and Wear Plates, Bearing Bushings and Washers, Accumulator Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||