This robust Nylon stock sheet, measuring 0.398" thick, 40" in length, and 22" in width, is engineered for superior performance in high-wear industrial settings.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.398" |
| Length | 40" |
| Width | 22" |
Designed for demanding industrial environments, this 0.398" thick Nylon stock sheet offers exceptional mechanical strength and durability. Its high-performance polymer composition provides excellent resistance to abrasion, impact, and a wide range of chemicals. With dimensions of 40" x 22", it is ideal for custom fabrication of wear pads, bushings, gears, and conveyor components where reduced friction and extended service life are critical. The material's inherent lubricity minimizes operational wear and tear, ensuring reliable performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cut lines on the Nylon stock sheet. 2. Utilize appropriate cutting tools, such as a bandsaw or CNC router, for precise fabrication. 3. Securely fasten the fabricated Nylon components using standard industrial hardware.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to poor edge quality. | Employ carbide-tipped saw blades or router bits specifically designed for cutting Nylon to achieve clean, smooth edges. |
| Over-tightening fasteners, which can deform or crack the Nylon. | Use washers and avoid excessive torque when fastening Nylon components. Allow for thermal expansion and contraction. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Pads, Custom Bushings and Bearings, Conveyor Components, Gears and Sprockets, Protective Liners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||