This 0.396-inch thick Nylon stock sheet, measuring 46" x 36", offers exceptional durability and resistance for critical pressure and temperature control applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.396" |
| Length | 46" |
| Width | 36" |
Precision-manufactured to tight tolerances, this 0.396" thick Nylon stock sheet (46" length x 36" width) exhibits superior mechanical strength, excellent abrasion resistance, and good chemical inertness, making it ideal for demanding operational environments. Its high tensile strength and impact resistance ensure reliable performance under pressure and temperature fluctuations. Typical applications include wear pads, seals, gaskets, and structural components in systems requiring robust material properties and dimensional stability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the substrate by ensuring it is clean, dry, and free of contaminants. 2. Carefully cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the cut component using suitable fasteners or bonding agents, adhering to system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting tool selection leading to delamination or chipping. | Utilize sharp, carbide-tipped cutting tools designed for plastics to ensure clean and precise cuts. |
| Over-tightening fasteners, causing stress concentrations and potential material cracking. | Apply fasteners with appropriate torque settings, employing washers to distribute load evenly across the Nylon surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Seals and gaskets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||