This 0.387-inch thick carbon steel stock sheet is engineered for demanding hydraulic applications. Its robust construction ensures superior strength and reliability in high-pressure environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.387" |
| Length | 25" |
| Width | 18" |
Precision-manufactured to tight tolerances, this 0.387" thick carbon steel stock sheet measures 25" in length and 18" in width. Composed of high-grade carbon steel, it exhibits excellent tensile strength and yield strength, crucial for withstanding extreme pressures and vibrations inherent in hydraulic systems. Its uniform thickness and flatness minimize stress concentrations and ensure predictable performance in components such as manifold blocks, pressure plates, and structural supports within hydraulic machinery, guaranteeing long-term operational integrity and safety.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Carefully position the carbon steel sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods as per engineering drawings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-strength fasteners. | Always utilize fasteners rated for the intended load and material compatibility to prevent premature failure. |
| Inadequate surface preparation before assembly. | Thoroughly clean and degrease all mating surfaces to ensure proper contact and prevent contaminants from compromising the seal. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Pressure Plate Fabrication, Structural Support for Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||