Engineered for demanding pressure and temperature control systems, this robust carbon steel stock sheet offers exceptional durability and reliability. Its substantial 0.386" thickness ensures structural integrity under challenging operational conditions.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.386" |
| Length | 12" |
| Width | 22" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a precise thickness of 0.386 inches, a width of 22 inches, and a length of 12 inches. Composed of high-grade carbon steel, it exhibits excellent tensile strength, a high yield point, and superior resistance to deformation under elevated pressures and temperatures. This material is ideal for fabricating critical components in steam systems, heat exchangers, and industrial fluid management where thermal stability and structural soundness are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Carefully measure and mark cut lines according to design specifications. 3. Utilize appropriate cutting tools and techniques to achieve precise dimensions, deburring edges as necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting leading to burrs and weakened edges. | Always use sharp, appropriate cutting tools and deburr edges thoroughly after cutting to maintain material integrity. |
| Overheating during welding or forming, compromising material properties. | Control heat input during fabrication processes, employing techniques such as preheating and interpass temperature control to prevent metallurgical degradation. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pressure vessel construction, Heat exchanger fabrication, High-temperature fluid conduits.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||