This high-performance Nylon stock sheet, measuring 0.384 inches thick by 27 inches long and 17 inches wide, is engineered for demanding pressure and temperature control applications where reliability is paramount.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.384" |
| Length | 27" |
| Width | 17" |
Built to exacting engineering tolerances, this 0.384" thick Nylon stock sheet (27" x 17") offers superior performance in pressure and temperature control systems. Nylon's inherent properties of excellent tensile strength, high abrasion resistance, and a low coefficient of friction make it ideal for dynamic applications. Its resistance to a wide range of chemicals and its ability to operate across a broad temperature spectrum ensure consistent performance and extended service life in demanding industrial environments, including seals, bearings, and wear pads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free from debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the component in its intended application using suitable fasteners and mounting hardware.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard plastic cutting tools not designed for dense polymers. | Utilize carbide-tipped saw blades or a CNC router specifically designed for cutting Nylon to achieve clean, precise edges and prevent chipping. |
| Over-tightening fasteners, which can lead to stress cracking or deformation of the Nylon. | Apply fasteners with appropriate torque settings, utilizing washers to distribute load and prevent localized pressure points. Allow for thermal expansion and contraction. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: High-pressure seals and gaskets, Wear-resistant bearing surfaces, Insulating components in temperature-sensitive systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||