This heavy-duty carbon steel stock sheet is engineered for demanding pulling and lifting operations. Its robust construction ensures superior strength and reliability in industrial environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.361" |
| Length | 40" |
| Width | 13" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a precise thickness of 0.361 inches, a substantial length of 40 inches, and a width of 13 inches. Composed of high-grade carbon steel, it exhibits excellent tensile strength and yield strength, making it ideal for load-bearing applications. The material's inherent toughness and resistance to deformation ensure long service life even under continuous stress. Ideal for fabricating custom lifting slings, anchor points, and structural components within pulling and lifting systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any defects or damage prior to installation. 2. Accurately measure and mark desired cut lines. 3. Utilize appropriate cutting and shaping tools for precision fabrication. 4. Ensure all edges are deburred and smooth to prevent hazards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to edge damage or uneven cuts. | Employ abrasive cut-off wheels or industrial saws specifically designed for steel to achieve clean, precise edges. |
| Failing to deburr edges after cutting, creating sharp hazards. | Always use a deburring tool or grinder to smooth all cut edges, ensuring operator safety. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom lifting sling fabrication, Reinforced anchor points, Structural components for winches and hoists.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||