This 0.358-inch thick Nylon stock sheet, measuring 29" x 23", is engineered for demanding hydraulic applications. Its superior material properties ensure reliable performance in high-stress environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.358" |
| Length | 29" |
| Width | 23" |
Trusted by engineers across multiple sectors, this Nylon stock sheet offers exceptional performance characteristics crucial for hydraulic systems. With a substantial thickness of 0.358 inches and dimensions of 29" x 23", it provides robust structural integrity. Nylon's inherent properties, including high tensile strength, excellent abrasion resistance, and good chemical compatibility, make it an ideal material for seals, bearings, and wear components within hydraulic machinery. Its ability to withstand significant loads and frequent cycling ensures longevity and reduced maintenance intervals.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully measure and cut the Nylon stock sheet to the required dimensions for your specific hydraulic component. 2. Ensure the mounting surfaces are clean and free of debris before installation. 3. Secure the fabricated Nylon part using appropriate fasteners, adhering to torque specifications to prevent over-tightening and material damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting techniques leading to material stress or delamination. | Utilize sharp, carbide-tipped cutting tools designed for plastics and maintain a consistent feed rate to prevent heat buildup and ensure clean cuts. |
| Over-tightening fasteners, causing deformation or cracking of the Nylon. | Employ torque wrenches and consult manufacturer guidelines for recommended torque values for Nylon components in hydraulic assemblies. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seals and Gaskets, Wear Pads and Bushings, Hydraulic Component Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||