This high-density Nylon stock sheet offers superior mechanical strength and thermal stability. Its 0.352" thickness provides excellent wear resistance and durability for critical pressure and temperature control applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.352" |
| Length | 18" |
| Width | 40" |
Built to exacting engineering tolerances, this 0.352" thick Nylon stock sheet measures 18" x 40". Composed of high-grade Nylon, it exhibits exceptional tensile strength, abrasion resistance, and a wide operating temperature range suitable for demanding industrial environments. Its excellent dielectric properties and low coefficient of friction make it ideal for components requiring precise movement and resistance to wear under pressure and thermal cycling. Ideal for gaskets, seals, bearing surfaces, and structural components within pressure and temperature control systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of debris. 2. Accurately measure and cut the Nylon sheet to the required dimensions using appropriate cutting tools. 3. Secure the Nylon component using suitable fasteners or adhesives, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard tools not designed for plastic machining, leading to chipping or melting. | Employ specialized cutting tools with appropriate rake angles and cooling for Nylon to ensure clean cuts and prevent material degradation. |
| Over-tightening fasteners, causing stress cracks or deformation in the Nylon sheet. | Use torque-limiting tools and appropriate washers to distribute pressure evenly when fastening, avoiding excessive clamping force. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: High-pressure seals and gaskets, Temperature-resistant bearing surfaces, Insulating components in control systems, Wear pads and guides, Diaphragms for fluid control.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||