This robust carbon steel stock sheet is engineered for extreme pulling and lifting operations. Its substantial thickness and dimensions ensure superior strength and load-bearing capacity for the most challenging industrial environments.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.347" |
| Length | 17" |
| Width | 31" |
Purpose-built for heavy-duty applications, this 0.347-inch thick carbon steel stock sheet offers exceptional tensile strength and rigidity. Measuring 17 inches by 31 inches, it provides a substantial surface area for integration into robust mechanical systems. The material's high yield strength and durability make it ideal for fabricated components in winches, hoists, towing equipment, and structural supports where reliability under significant stress is paramount. This sheet is designed to withstand continuous operational strain and impact, ensuring long service life in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity before fabrication. 2. Cut and shape according to design specifications using appropriate industrial tooling. 3. Weld or mechanically fasten to primary structural components, ensuring secure and load-bearing joints.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a thinner gauge steel for high-stress applications. | Always select steel stock sheets with adequate thickness and material grade specified for the intended load capacity and operational demands. |
| Inadequate joint preparation for welding or fastening. | Ensure all surfaces are clean, free of contaminants, and properly prepped according to welding or fastening standards for maximum joint strength. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Fabrication of winch drums and mounting brackets, Construction of heavy-duty lifting frames and slings, Reinforcement plates for towing and recovery equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||