This robust Nylon stock sheet offers exceptional durability and wear resistance. Measuring 0.346 inches thick, 27 inches in length, and 44 inches in width, it's designed for demanding industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.346" |
| Length | 27" |
| Width | 44" |
Engineered for reliability and performance, this 0.346" thick Nylon stock sheet is manufactured to precise tolerances, ensuring consistent material properties. Its inherent toughness, excellent abrasion resistance, and low coefficient of friction make it suitable for a wide array of demanding applications. The substantial dimensions of 27" x 44" provide ample material for fabrication of custom components, including wear pads, bushings, gears, and structural elements where impact strength and chemical resistance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to desired dimensions using appropriate cutting tools for plastics. 2. Machine or fabricate components according to design specifications. 3. Ensure proper fitment and secure installation using suitable fasteners or adhesives.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard metalworking tools without proper adjustments for Nylon's properties. | Utilize cutting and machining tools designed for plastics, ensuring appropriate speeds, feeds, and cooling to prevent melting or stress cracking. |
| Over-tightening fasteners, which can cause cracking or deformation in Nylon. | Employ proper torque specifications when fastening, and consider using washers to distribute load across a wider surface area. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Bushings, Custom Gears and Sprockets, Gaskets and Seals, Protective Liners, Chute Linings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||