This high-strength carbon steel stock sheet, precisely manufactured to 0.346" thickness, 22" width, and 29" length, is engineered for demanding hydraulic applications requiring exceptional structural integrity and wear resistance.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.346" |
| Length | 22" |
| Width | 29" |
Purpose-built for heavy-duty applications, this carbon steel stock sheet offers superior tensile strength and fatigue resistance, crucial for components within high-pressure hydraulic systems. The 0.346" (approximately 8.79mm) thickness provides robust structural support, while the 22" x 29" dimensions offer ample material for fabrication of custom hydraulic manifolds, reservoir bases, or structural support elements. Its inherent ductility allows for complex forming operations without compromising material integrity, ensuring reliable performance under extreme operational loads and conditions. This material is chosen for its cost-effectiveness and proven track record in harsh industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity of the stock sheet against project requirements. 2. Prepare the sheet for cutting and forming according to fabrication blueprints. 3. Weld or fasten the fabricated component securely into the hydraulic system, ensuring proper sealing and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade steel for hydraulic components. | Always select stock sheets that meet or exceed the specified material grade and thickness for the intended hydraulic application to prevent premature failure. |
| Inadequate preparation before cutting or forming. | Ensure proper tooling and techniques are employed during cutting and forming to avoid introducing stress concentrations or material defects. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic manifold fabrication, Hydraulic reservoir bases, Structural support for hydraulic equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||