This high-grade carbon steel stock sheet, measuring 0.345" thick by 26"x32", is specifically engineered for demanding hydraulic applications. Its robust construction ensures superior performance and longevity in critical fluid power systems.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.345" |
| Length | 26" |
| Width | 32" |
Precision-manufactured to tight tolerances, this 0.345" thick carbon steel stock sheet offers exceptional dimensional stability for critical hydraulic component fabrication. The material exhibits a minimum tensile strength of 45,000 psi and yield strength of 28,000 psi, ensuring resilience under high pressure. Its 26"x32" dimensions provide ample material for custom manifold blocks, hydraulic cylinder bases, and reservoir fabrication, minimizing waste and ensuring consistent fit-up in complex assemblies. Surface finish is optimized for sealing surfaces and leak prevention.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions against design specifications. 2. Clean all surfaces to remove any contaminants or protective coatings. 3. Machine as per design tolerances, ensuring smooth, burr-free edges.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a non-hardened steel for high-pressure hydraulic components. | Always specify and verify the material grade and hardness to ensure it meets the pressure and fatigue requirements of the hydraulic system. |
| Inadequate surface preparation before machining. | Thoroughly degrease and clean the steel sheet to prevent tool contamination and ensure optimal machining results and component sealing. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Fabrication, Hydraulic Cylinder Bases, Hydraulic Reservoir Construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||