This 0.339-inch thick carbon steel stock sheet, measuring 19 inches by 39 inches, is specifically engineered for robust performance in hydraulic systems. Its high tensile strength and durability ensure reliable component construction.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.339" |
| Length | 19" |
| Width | 39" |
Built to exacting engineering tolerances, this 0.339-inch thick carbon steel stock sheet provides superior structural integrity for critical hydraulic components. Manufactured from high-quality carbon steel, it exhibits excellent tensile strength and yield strength, crucial for withstanding high pressures and operational stresses inherent in hydraulic systems. The precise dimensions of 19" x 39" ensure accurate material utilization and seamless integration into fabrication processes for manifolds, valve bodies, and pressure vessels.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project specifications. 2. Precisely cut the carbon steel sheet to required component dimensions using appropriate cutting tools. 3. Perform necessary machining, welding, or forming operations according to hydraulic system design requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting methods leading to material deformation or stress risers. | Employ precision cutting techniques such as waterjet, laser cutting, or plasma cutting, ensuring proper speed and power settings to minimize heat-affected zones. |
| Inadequate surface preparation before welding or coating, compromising joint strength and corrosion resistance. | Thoroughly clean the surface of the carbon steel, removing all mill scale, oil, grease, and rust prior to any welding or coating application. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Pressure Vessel Fabrication, Hydraulic Cylinder Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||