Engineered for superior performance in demanding environments, this 0.334-inch thick brass stock sheet is a robust solution for critical pulling and lifting applications. Its inherent material properties ensure reliability and longevity.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.334" |
| Length | 13" |
| Width | 28" |
Trusted by engineers across multiple sectors, this brass stock sheet offers exceptional tensile strength and corrosion resistance, crucial for high-stress pulling and lifting operations. Measuring 0.334" in thickness, 13" in length, and 28" in width, its dense, non-sparking nature makes it suitable for environments where safety is paramount. The inherent ductility of brass allows for some deformation under load without catastrophic failure, providing a margin of safety in dynamic applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Position the brass stock sheet according to the design specifications. 3. Securely fasten the sheet using appropriate hardware (e.g., bolts, rivets) designed for brass compatibility and the anticipated load. 4. Inspect all connections for integrity before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners without considering galvanic corrosion when in contact with brass. | Utilize fasteners made from compatible materials such as stainless steel (316 grade recommended) or brass to prevent galvanic corrosion and ensure long-term joint integrity. |
| Over-tightening fasteners, leading to deformation or stress concentration in the brass sheet. | Apply fasteners to the manufacturer's recommended torque specifications or use a torque wrench to prevent over-stressing the brass material. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Reinforcement plates for pulley systems, Wear pads in lifting equipment, Components for specialized towing apparatus.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||