This high-quality carbon steel stock sheet, measuring 0.330" thick, 33" wide, and 47" long, is specifically designed for demanding hydraulic applications requiring robust material integrity and precise dimensional stability.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.330" |
| Length | 33" |
| Width | 47" |
Engineered for reliability and performance, this carbon steel stock sheet exhibits exceptional tensile strength and formability, making it ideal for fabricating critical hydraulic components such as manifolds, mounting plates, and structural supports. The 0.330" thickness ensures substantial load-bearing capacity and resistance to pressure fluctuations inherent in hydraulic circuits. Its precise dimensions (33" x 47") minimize material waste and facilitate accurate machining, crucial for maintaining system integrity and preventing leaks in high-pressure environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the stock sheet is clean and free from any contaminants. 2. Precisely mark and cut the sheet according to the required component dimensions using appropriate cutting tools. 3. Smooth all edges and deburr any sharp areas to prevent material fatigue or damage during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or improperly cut material, leading to structural weakness. | Always verify dimensions and use precision cutting methods to match design specifications exactly. |
| Failing to deburr edges after cutting, which can cause stress risers. | Thoroughly deburr all cut edges with a file or grinder to ensure a smooth finish. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Fabrication, Hydraulic System Mounting Plates, Structural Components for Hydraulic Presses.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||