This high-quality carbon steel stock sheet is engineered for demanding hydraulic systems. Its robust 0.327-inch thickness and precise dimensions ensure superior performance and longevity in critical applications.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.327" |
| Length | 27" |
| Width | 15" |
Specified by design engineers worldwide, this 0.327" thick carbon steel stock sheet offers exceptional tensile strength and yield strength, crucial for withstanding high pressures and dynamic loads inherent in hydraulic machinery. Manufactured from a grade known for its weldability and formability, it provides a reliable substrate for fabricating hydraulic components, manifolds, and structural supports. The precise 27" length and 15" width minimize waste and facilitate efficient integration into existing designs, ensuring compatibility and performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to precise dimensions for component fabrication. 2. Weld or fasten securely to existing hydraulic infrastructure according to design specifications. 3. Perform thorough pressure testing to verify integrity and leak prevention.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lighter gauge steel for high-pressure hydraulic components. | Always select a steel grade and thickness verified to meet or exceed the maximum operating pressure requirements of the hydraulic system. |
| Inadequate surface preparation before welding or sealing. | Thoroughly clean the steel surface of all contaminants, oils, and rust prior to any welding or sealing operations to ensure a strong, leak-free bond. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic manifold fabrication, Cylinder component manufacturing, High-pressure fluid containment structures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||