This robust Nylon stock sheet, measuring 0.314 inches thick, 28 inches in length, and 40 inches in width, offers exceptional durability and resistance. Engineered for critical Heating & Cooling systems.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.314" |
| Length | 28" |
| Width | 40" |
Manufactured under strict quality controls, this 0.314" thick Nylon stock sheet (28" x 40") provides superior mechanical strength and wear resistance. Its high tensile strength and low coefficient of friction make it an ideal material for components in demanding Heating & Cooling environments, such as bearings, bushings, and wear pads. The material exhibits excellent chemical resistance to many oils, greases, and solvents commonly found in these systems, ensuring longevity and reliable performance under operational stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the substrate for mounting, ensuring a clean and level surface. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 3. Secure the cut Nylon sheet to the designated area using approved industrial adhesives or mechanical fasteners, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation before bonding. | Ensure the substrate is thoroughly cleaned, degreased, and lightly abraded if necessary to promote optimal adhesion. |
| Using incorrect cutting tools, leading to rough edges or material damage. | Employ sharp, industrial-grade cutting tools specifically designed for plastic or nylon to achieve clean, precise cuts. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: HVAC component fabrication, Wear strips and guides in industrial fans, Bearing surfaces for rotating equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||