This robust carbon steel stock sheet, measuring 0.311" thick, 41" in length, and 18" in width, is engineered for demanding pressure and temperature control systems. Its material properties ensure superior structural integrity and longevity in challenging environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.311" |
| Length | 41" |
| Width | 18" |
Precision-manufactured to tight tolerances, this 0.311" thick carbon steel stock sheet offers a nominal yield strength of 30,000 psi and a tensile strength of 45,000 psi. The 41" length and 18" width provide ample material for custom fabrication of critical components in pressure vessels, heat exchangers, and high-temperature piping systems. Its inherent machinability and weldability facilitate seamless integration into existing infrastructure, ensuring reliable performance under extreme thermal and mechanical stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the operating environment. 2. Precisely cut the stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten or weld the fabricated component according to established engineering codes and standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for corrosive environments. | Select a corrosion-resistant alloy if the application involves exposure to aggressive media. |
| Inadequate weld preparation leading to joint failure. | Thoroughly clean and prepare weld edges, ensuring proper beveling and joint fit-up as per WPS. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pressure vessel construction, Heat exchanger fabrication, High-temperature piping components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||