This 0.308-inch thick brass stock sheet offers superior durability and corrosion resistance. Precisely manufactured, it's an ideal material for a wide range of demanding industrial and decorative applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.308" |
| Length | 41" |
| Width | 36" |
Built to exacting engineering tolerances, this brass stock sheet measures 0.308 inches in thickness, with a generous length of 41 inches and a width of 36 inches. Composed of a high-grade brass alloy (typically 60-70% copper, 30-40% zinc), it exhibits excellent machinability, solderability, and electrical conductivity, while resisting corrosion. Its substantial gauge makes it suitable for structural components, heavy-duty electrical grounding, and robust decorative elements where formability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the application area is clean and free from debris. 2. Carefully position the brass sheet according to design requirements. 3. Secure the sheet using appropriate fasteners or bonding methods, adhering to load-bearing specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient fasteners for the sheet's weight or intended load. | Consult load charts and engineering drawings to determine the correct number, type, and spacing of fasteners for secure installation. |
| Exposing brass to highly corrosive environments without protective measures. | Apply a suitable protective coating or sealant if the brass will be subjected to aggressive chemicals or prolonged exposure to salt spray. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical grounding and busbars, Fabrication of custom brackets and structural components, High-end decorative panels and architectural elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||