This robust 0.290" thick Nylon stock sheet is engineered for superior performance in pressure and temperature control applications. Its exceptional durability and thermal resistance make it an ideal choice for demanding industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.290" |
| Length | 37" |
| Width | 15" |
A high-performance industrial component, this Nylon stock sheet offers exceptional wear resistance, low coefficient of friction, and good dimensional stability across a range of operating temperatures. Its inherent toughness and resistance to many chemicals make it suitable for demanding applications. The sheet measures 0.290 inches in thickness, with standard dimensions of 37 inches in length and 15 inches in width, providing ample material for customization and fabrication of critical components. Ideal for seals, gaskets, wear pads, and insulating elements in fluid handling and thermal management systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free of contaminants. 2. Carefully cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the fabricated Nylon component using suitable fasteners or adhesives, ensuring proper alignment and seal integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for Nylon, leading to chipping or uneven edges. | Utilize sharp, high-speed steel or carbide-tipped cutting tools specifically designed for plastics to achieve clean, precise cuts. |
| Over-tightening fasteners, which can cause excessive stress and deformation of the Nylon component. | Employ torque-limiting tools and washers to distribute pressure evenly and prevent over-compression of the Nylon material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: High-pressure fluid seals, Thermal insulation barriers, Wear-resistant components in pumps and valves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||