Engineered for demanding pulling and lifting operations, this 0.288-inch thick carbon steel stock sheet offers exceptional strength and durability. Its precise dimensions of 20"x31" make it ideal for custom fabrication and heavy-duty applications.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.288" |
| Length | 20" |
| Width | 31" |
Specified by design engineers worldwide, this carbon steel stock sheet boasts a precise thickness of 0.288 inches, a length of 20 inches, and a width of 31 inches. Manufactured from high-grade carbon steel, it exhibits superior tensile strength and yield strength, crucial for withstanding extreme loads and forces encountered in pulling and lifting scenarios. Its inherent toughness and resistance to deformation ensure reliable performance in harsh industrial environments. The material's weldability and machinability allow for seamless integration into custom-engineered assemblies and structural components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any damage or defects before fabrication. 2. Fabricate to required dimensions and specifications using appropriate cutting and shaping techniques. 3. Securely integrate into the pulling or lifting apparatus, ensuring all load-bearing connections are rated for the intended capacity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong grade of carbon steel for high-stress lifting applications. | Always confirm the steel grade meets or exceeds the specific tensile and yield strength requirements for the intended load and safety factors. |
| Inadequate edge preparation or welding procedures leading to stress concentrations. | Ensure all edges are properly deburred and that welding procedures adhere to industry standards for the specific carbon steel grade to maintain structural integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom winch drum fabrication, Heavy-duty towing attachment points, Structural reinforcement for lifting frames.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||